Create a Petalinux project with a GNP, in this case ZCU102 www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug1144-petalinux-tools-reference-guide.pdf Petalinux is an open source tool and does not need a license, you can refer to ug1144 (page 12). 2. Scroll down and click PetaLinux 2017.4 Install or click this link: www.xilinx.com/member/forms/download/xef.html?filename=petalinux-v2017.4-final-installer.run&akdm=1 Before you start, make sure you have a xilinx.com account. If you need it, do it here. In this case, petalinux was installed on: DEVDIR/home/caguero/devdirs/ultrascale/petalinux-install/petalinux-v2016.2-final/ Reading and agreeing to the PetaLinux EULA is a required and integrated part of the PetaLinux process installation. For users who wish to read the license agreement before installing or retaining the license for their registration, the license is available in simple ASCII text in the $PETALINUX/etc/license/petalinux-license.txt file. Also make sure that `petalinux-v2018.2-final-install.run` is enforceable. For this execution command, tap Entry to scroll through the license agreement. Press to the end (or just press `q`).

Press q (if not). Then tap y: This allows you to install PetaLinux tools in the directory /opt/pkg/petalinux. Xilinx logo via twitter.com/xilinxinc found under [link] 6. Type sudo chown -R zpfeffer:zpfeffer /opt/pkg/petalinux If the installation is defective and the user has already accepted the licenses, don`t let them accept them again. You will find the latest installation instructions in ug1144-petalinux-tools-reference-guide.pdf. I`m looking for more information about the licensing agreements for vivado Design Suite. You must download the petalinux file-v2017.4-final-install.chmod. This has been added to these instructions.

After downloading the `petalinux-v2018.2-final-install.run` file, you can perform these steps. 1. Go to: www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-design-tools.html Just Petalinux end user license agreement is required. When using Petalinux, do I have to face other licensing restrictions to create a commercial product with a Xilinx SoC? I mean, all the binary binaries built by PetaLinux are finally distributed with the product. Do I also need to send open source licenses with hardware or a firmware update package? Does XIlinx provide legal advice on this subject? Download PetaLinux 2018.2 Installer (TAR/GZIp -6.15GB) File from the top Link. For example, download this file called `petalinux-v2018.2-final-install.run`: Install PetaLinux tools under /opt/pkg/petalinux: 8. Run again: ./petalinux-v2018.2-final-install.run/opt/pkg/petalinux as a user you have configured. I want to make a commercial product with PetaLinux 2018.2.

That`s why I would like to make the license correct for each position provided. BitBake provides a legal information mechanism that I would like to use with petalinux tools. Is there such a path with petalinux tools? 2. Make sure you have the following packages by running: You will receive an invitation to enter your password. Enter the password and a publisher opens. You can also install older versions to meet your needs and hardware support.